NCC 2022 Standard

What is a 7-Star Energy Rating?

Since 1 October 2023, every new home built in Australia must achieve a minimum 7-star energy rating under the Nationwide House Energy Rating Scheme (NatHERS). This replaced the previous 6-star minimum that had been in effect since 2010. The rating measures how much energy a home needs for heating and cooling to maintain comfortable temperatures — the higher the star rating, the less energy required.

Key fact: The 7-star requirement applies to all new Class 1 (houses) and Class 2 (apartments) buildings Australia-wide. Renovations and extensions over a certain size trigger compliance too. The standard is set by the NCC (National Construction Code) 2022, Section J, and the 7-star minimum stays unchanged under NCC 2025.

How the Star Rating Works

NatHERS rates homes on a 0 to 10 scale. A 0-star home has no thermal performance at all — essentially an uninsulated tin shed. A 10-star home requires zero mechanical heating or cooling to stay comfortable year-round.

The rating is calculated using approved NatHERS software (AccuRate, FirstRate5, BERS Pro, or similar) which models the home's thermal performance based on:

The software runs an hourly simulation across a full year of climate data for the specific location. It calculates the total MJ/m² of energy needed for heating and cooling. That number maps to a star rating based on thresholds set for each climate zone.

What Changed: 6 Stars vs 7 Stars

The jump from 6 to 7 stars sounds small but it represents a significant reduction in energy consumption. A 7-star home uses roughly 25–30% less heating and cooling energy than a 6-star home of the same size in the same location.

What a 6-star home needed

  • Standard insulation (R2.0 walls, R4.0 ceiling)
  • Single-glazed aluminium windows were often sufficient
  • Basic draught sealing
  • Less attention to thermal bridging
  • Orientation helped but wasn't critical

What 7-star typically requires

  • Higher insulation (R2.5+ walls, R5.0-R6.0 ceiling)
  • Double glazing or thermally broken frames in most zones
  • Comprehensive draught sealing
  • Thermal break solutions for steel frames
  • Good orientation and considered window placement

The specific upgrades needed depend heavily on climate zone. A home in Brisbane (Zone 2) faces different challenges than a home in Melbourne (Zone 6) or Hobart (Zone 7). In warmer zones, the emphasis is on keeping heat out. In cooler zones, it is about keeping heat in while managing moisture.

NatHERS Star Band Thresholds

Each star rating maps to a maximum heating and cooling energy load in MJ/m²/year. These thresholds vary by climate zone. Here are examples for common zones:

Star RatingZone 2 (Brisbane)Zone 5 (Adelaide)Zone 6 (Melbourne)Zone 7 (Hobart)
6 stars≤ 50 MJ/m²≤ 79 MJ/m²≤ 73 MJ/m²≤ 94 MJ/m²
7 stars≤ 33 MJ/m²≤ 53 MJ/m²≤ 49 MJ/m²≤ 63 MJ/m²
8 stars≤ 20 MJ/m²≤ 33 MJ/m²≤ 30 MJ/m²≤ 39 MJ/m²

Source: NatHERS star band thresholds. The exact values vary by specific location within each zone. These are indicative figures for capital cities.

Steel Frame Kit Homes and 7-Star

Steel frames conduct heat roughly 300 to 500 times faster than timber. This thermal bridging effect means a steel frame wall with R2.5 insulation batts performs more like an R1.5 wall in practice — the steel studs create thermal shortcuts through the insulation.

This does not mean steel frame homes cannot achieve 7 stars. It means the design needs to account for thermal bridging from the start. Steel frame kit homes that achieve 7 stars typically include:

The advantage of a kit home approach is that these solutions are engineered into the frame design before manufacturing. Thermal break positions, insulation specifications, and cladding details are resolved at the drafting stage — not improvised on site.

Common Questions

Does the 7-star rating include hot water, lighting, and appliances?

No. The NatHERS star rating only measures the thermal performance of the building shell — heating and cooling energy. However, NCC 2022 also introduced a separate whole-of-home energy budget (Section J Part J3) that covers hot water, lighting, pool pumps, and renewable energy. Both must be satisfied: 7-star thermal rating plus the whole-of-home budget.

Can I still build a steel frame home without thermal breaks?

Technically yes, if the overall design achieves 7 stars through other means (more insulation, better windows, excellent orientation). But in practice, thermal breaks are the most cost-effective solution for steel frames. Trying to compensate without them usually costs more.

Is the 7-star minimum going to increase?

The ABCB (Australian Building Codes Board) signalled that residential energy standards would not increase under NCC 2025 — the 7-star minimum remains unchanged. Further increases to 7.5 or 8 stars are not expected until at least NCC 2028. However, individual states can set higher requirements, and some councils already encourage voluntary 7.5+ star builds.

Do renovations need to meet 7 stars?

Extensions and major renovations over a certain size trigger NCC compliance. The rules vary by state, but generally, if you are adding habitable floor area, the new section must achieve 7 stars. Existing sections are not required to be upgraded retroactively.

Related Guides

Start Your 7-Star Kit Home Build

Every BRIbuild steel frame kit is designed for 7-star compliance from the drafting stage. Thermal breaks, insulation specs, and NatHERS-ready documentation included.

View Floor Plans →

Or call 1300 866 131